After Printing!!!

Cleaned Negatives with photo flow solution, and dried them with a photo wipe. Then we loaded the Negative into enlarger and Focused image with the grain focuser, and set aperture to where we bearly see the image, but first we did this about three times with different timings, for the test strip to be made to find how much time & light the image needs so it won't be to dark or to light. Then, once we choose the timing for the image we made the final print with the 3x7 emulsion paper, and ran it throught the chemicals: developer, stop bath, fixer, and ran it through water for 5 min. and finally just let it dry in one of the racks.